Wep0ff is new tool to crack WEP-key without access to AP by mount fake access point attack against WEP-based wireless clients.
It uses combination of fragmentation and evil twin attacks to generate
traffic which can be used for KoreK-style WEP-key recovery.
This tool can be used to mount fake access point attack against WEP-based wireless clients.
This code tested patched mm,
madwifi-old drivers with athraw support, but also works with madwifi-ng. With madwifi-ng you need to create two virtual interfaces: one in master mode (for fake AP) and second in monitor mode (to listen on).
How to Use:
1. Setup fake AP with KARMA tools or iwconfig
iwpriv ath0 mode 2
iwconfig ath0 mode master essid foo enc 1122334455 channel 7
echo 1 > /proc/sys/dev/ath0/rawdev
echo 1 > /proc/sys/dev/ath0/rawdev_type
ifconfig ath0
up ifconfig ath0raw up2. Start this program (./wep0ff ath0raw 00:01:02:03:04:05)
3. Wait until client connect to fake access point
4. Launch airodump-ng to collect packets
5. Launch aircrack-ng to recover WEP key
Download
Sunday, December 30, 2007
How to Search For Rapidshare Folders by Using Goolge !!
Just go to Google.com and paste this string there ..
site:rapidshare.com inurl:users "Anything you want to search for"
site:rapidshare.de inurl:users "cracking"
site:rapishare.com inurl:files "web hacking"
site:rapidshare.de inurl:files "tips and tricks"
site:rapidshare.com inurl:users "Anything you want to search for"
site:rapidshare.de inurl:users "cracking"
site:rapishare.com inurl:files "web hacking"
site:rapidshare.de inurl:files "tips and tricks"
Thursday, December 27, 2007
Bios Entry Keys combos !!
Acer - CTL ALT ESC
AMI BIOS - DEL, F1 or F2
AST, Advantage, Award, Tandon - CTL ALT ESC
Award BIOS - DEL or CTL ALT ESC
Compaq - F10
DELL - F1 or DEL or CTL ALT ENTER
DTK BIOS - Esc
Gateway 2000 - F1
Hewlett Packard - F1
IBM
Older Models - In order to get into the configuration of the IBM setup screen CMOS screen you need to hold down both mouse buttons during bootup.
Aptiva - F1
PS/2 - CTL ALT INS after CTL ALT DEL
PS/2 with reference partition - INS
NEC - F2
Olivetti PC Pro - SHIFT CTL ALT Numpad DEL
Packard Bell - F1 or F2
Phoenix BIOS F1 or F2, or CTL ALT ESC or CTL ALT S or CTL S or CTL ALT INS
Sharp Laptop 9020 - F2
Sony - F3 at switchon, then F2 or F1
Tandon - CTL SHIFT ESC
Toshiba - ESC at switchon
Zenith - CTL ALT INS
Miscellaneous - CTL ESC or CTL ALT +
AMI BIOS - DEL, F1 or F2
AST, Advantage, Award, Tandon - CTL ALT ESC
Award BIOS - DEL or CTL ALT ESC
Compaq - F10
DELL - F1 or DEL or CTL ALT ENTER
DTK BIOS - Esc
Gateway 2000 - F1
Hewlett Packard - F1
IBM
Older Models - In order to get into the configuration of the IBM setup screen CMOS screen you need to hold down both mouse buttons during bootup.
Aptiva - F1
PS/2 - CTL ALT INS after CTL ALT DEL
PS/2 with reference partition - INS
NEC - F2
Olivetti PC Pro - SHIFT CTL ALT Numpad DEL
Packard Bell - F1 or F2
Phoenix BIOS F1 or F2, or CTL ALT ESC or CTL ALT S or CTL S or CTL ALT INS
Sharp Laptop 9020 - F2
Sony - F3 at switchon, then F2 or F1
Tandon - CTL SHIFT ESC
Toshiba - ESC at switchon
Zenith - CTL ALT INS
Miscellaneous - CTL ESC or CTL ALT +
Hide Windows Vista Hard drives !!
Back up your registry before you start!
1. Open Regedit.
2. Navigate to one of these strings:
HKEY_CURRENT_USER\Software\Microsoft\Windows\
CurrentVersion\Policies\Explorer - this only changes the settings for the current logged in user
HKEY_LOCALMACHINE\Software\Microsoft\Windows\
CurrentVersion\Policies\Explorer - this changes the settings for all users on the machine. You may have to create the key folder "Explorer" manually.
3. In the Explorer key folder, create a new DWORD value by right-clicking Explorer, then choosing New DWORD value. Name the value "NoDrives" (without the quotes). This value defines local and network drive visibility for each logical drive on the computer. All drives will be visible as long as this value's data is set to 0.
4. Following the table below, enter the decimal number corresponding to the drive(s) you want to hide as NoDrives value data. When you right-click on NoDrives and choose Modify, make sure you select Decimal base, not Hexadecimal.
Drive Number to hide
A: 1
B: 2
C: 4
D: 8
E: 16
F: 32
G: 64
H: 128
I: 256
J: 512
K: 1024
L: 2048
M: 4096
N: 8192
O: 16384
P: 32768
Q: 65536
R: 131072
S: 262144
T: 524288
U: 1048576
V: 2097152
W: 4194304
X: 8388608
Y: 16777216
Z: 33554432
All drives 67108863
If you want to hide more than one drive, you simply add the drive amounts together for a combined total.
For example, to hide the D:/ and T:/ drives, add the decimal value for the D:/ drive to the decimal value to the T:/ drive.
8 (D) + 524288 (T) = 524296
To disable all of your visible drives, set the value to 67108863.
You must reboot your PC to see your changes.
1. Open Regedit.
2. Navigate to one of these strings:
HKEY_CURRENT_USER\Software\Microsoft\Windows\
CurrentVersion\Policies\Explorer - this only changes the settings for the current logged in user
HKEY_LOCALMACHINE\Software\Microsoft\Windows\
CurrentVersion\Policies\Explorer - this changes the settings for all users on the machine. You may have to create the key folder "Explorer" manually.
3. In the Explorer key folder, create a new DWORD value by right-clicking Explorer, then choosing New DWORD value. Name the value "NoDrives" (without the quotes). This value defines local and network drive visibility for each logical drive on the computer. All drives will be visible as long as this value's data is set to 0.
4. Following the table below, enter the decimal number corresponding to the drive(s) you want to hide as NoDrives value data. When you right-click on NoDrives and choose Modify, make sure you select Decimal base, not Hexadecimal.
Drive Number to hide
A: 1
B: 2
C: 4
D: 8
E: 16
F: 32
G: 64
H: 128
I: 256
J: 512
K: 1024
L: 2048
M: 4096
N: 8192
O: 16384
P: 32768
Q: 65536
R: 131072
S: 262144
T: 524288
U: 1048576
V: 2097152
W: 4194304
X: 8388608
Y: 16777216
Z: 33554432
All drives 67108863
If you want to hide more than one drive, you simply add the drive amounts together for a combined total.
For example, to hide the D:/ and T:/ drives, add the decimal value for the D:/ drive to the decimal value to the T:/ drive.
8 (D) + 524288 (T) = 524296
To disable all of your visible drives, set the value to 67108863.
You must reboot your PC to see your changes.
Problems of Changing the Boot Screen !!
If you download a hacked system file with a new boot screen and replace the old file on your computer, after you restart, you may find that your computer will not start and will give you a nice error message.
C:\Windows\System32\ntoskrnl.exe is missing or corrupt
Missing or corrupt?
This is the most common problem that users experience when trying to change their boot screen using the file swap technique.
Users that get this message, or any similar error message, are receiving it because they replaced their system file with a file that is not compatible with their version of Windows XP.
Windows XP was released in many different languages for different parts of the world. Each language version of XP has a slightly different version of code. Additionally, Microsoft continuously releases software update patches to update the code of the system files such as the monthly security updates and almost yearly service packs. All of these factors result in several different versions of the boot screen system file floating around on the Web.
You could find a boot screen file that was made from a hacked system file from the German version of Windows XP. Or more commonly, you could find a boot screen that was made from a hacked file from the original version of Windows XP.When you try to install that boot screen on a computer that, for example, has Service Pack 2 installed on the English version of XP, you will have problems.
Windows XP will only work with a specific version of the system file that contains the boot screen.
This arrangement complicates the change of the boot screen with the common file swap technique. It will do so because users will have difficulty telling on what version of Windows XP a particular boot screen that is distributed on the Web will work. Users have to be aware of more than just the version problem. Because you are downloading a hacked version of a critical system file that is executed during the boot sequence, you could possibly download a version that someone modified and in which she /he put some variation of malicious code that could harm your computer
C:\Windows\System32\ntoskrnl.exe is missing or corrupt
Missing or corrupt?
This is the most common problem that users experience when trying to change their boot screen using the file swap technique.
Users that get this message, or any similar error message, are receiving it because they replaced their system file with a file that is not compatible with their version of Windows XP.
Windows XP was released in many different languages for different parts of the world. Each language version of XP has a slightly different version of code. Additionally, Microsoft continuously releases software update patches to update the code of the system files such as the monthly security updates and almost yearly service packs. All of these factors result in several different versions of the boot screen system file floating around on the Web.
You could find a boot screen file that was made from a hacked system file from the German version of Windows XP. Or more commonly, you could find a boot screen that was made from a hacked file from the original version of Windows XP.When you try to install that boot screen on a computer that, for example, has Service Pack 2 installed on the English version of XP, you will have problems.
Windows XP will only work with a specific version of the system file that contains the boot screen.
This arrangement complicates the change of the boot screen with the common file swap technique. It will do so because users will have difficulty telling on what version of Windows XP a particular boot screen that is distributed on the Web will work. Users have to be aware of more than just the version problem. Because you are downloading a hacked version of a critical system file that is executed during the boot sequence, you could possibly download a version that someone modified and in which she /he put some variation of malicious code that could harm your computer
Removing a User From Welcome Screen !!
1. Click the Start button and select Run, then type regedit in the box and click OK.
2. This will start up the system Registry Editor. You are going to want to expand the following
keys: HKEY_LOCAL_MACHINE, SOFTWARE, Microsoft,Windows NT,
CurrentVersion,Winlogon, SpecialAccounts, and UserList.
3. You should now see the list of the account names, and parts of account names, that the system
will look for and will hide.To add a name to the list, just right-click and select New
1 DWORD value. A DWORD is a specific data type of an entry
in the system registry. In short, the DWORD data type allows an integer value to be stored.
4. When the new key is created, enter in the name of the user’s account as the name of the
key. Once you have done this, you can close regedit.
After log off and back on or reboot, the user will not be displayed on the Welcome screen.
If you ever want to log into the account that you hide from the Welcome screen, just press
Ctrl_Alt_Delete on your keyboard once, twice, and you will be able to type in the name of
the user under which you want to log in. This way, you can hide an account from your family or
friends but can still log into it.
If you ever change your mind and want the account to be displayed on the Welcome screen
again, just delete the entry that you made in the list in the System Registry and everything will
be back the way it was.
2. This will start up the system Registry Editor. You are going to want to expand the following
keys: HKEY_LOCAL_MACHINE, SOFTWARE, Microsoft,Windows NT,
CurrentVersion,Winlogon, SpecialAccounts, and UserList.
3. You should now see the list of the account names, and parts of account names, that the system
will look for and will hide.To add a name to the list, just right-click and select New
1 DWORD value. A DWORD is a specific data type of an entry
in the system registry. In short, the DWORD data type allows an integer value to be stored.
4. When the new key is created, enter in the name of the user’s account as the name of the
key. Once you have done this, you can close regedit.
After log off and back on or reboot, the user will not be displayed on the Welcome screen.
If you ever want to log into the account that you hide from the Welcome screen, just press
Ctrl_Alt_Delete on your keyboard once, twice, and you will be able to type in the name of
the user under which you want to log in. This way, you can hide an account from your family or
friends but can still log into it.
If you ever change your mind and want the account to be displayed on the Welcome screen
again, just delete the entry that you made in the list in the System Registry and everything will
be back the way it was.
Adding Web site links to the Start Menu !!
1. Click the Start Menu and select Run.
Then type regedit to launch the Registry Editor.
2. When the Registry Editor has launched, you will want to expand the HKEY_CLASSES_ROOT folder and then the CLSID folder.
3. Next, you will want to scroll through the list of Class IDs until you find {2559a1f6-21d7-11d4-bdaf-00c04f60b9f0} and expand it as well. Start your modifications by naming this class. Right-click the (default) entry within the{2559a1f6-21d7-11d4-bdaf-00c04f60b9f0} folder and select modify.
5. Then type marshalinfo-in.blogspot.com {or any other website you like} in the value data box and click OK to save your changes.
6. Now you are going to set up the icon that will be displayed on the Start panel next to the name. To do this, you will need to create a new folder. Select the {2559a1f6-21d7-11d4-bdaf-00c04f60b9f0} folder again and right-click it. Then select New and then Key. This will create a new subfolder that you should call DefaultIcon.
7. Right-click the Default Icon folder that you just created and create a new string value by expanding new and selecting string value. Name this new value (Default). The value of this string will be the location of the icon that you want to use.
8. If you like using the system icons which are stored in the shell32.dll.To use these icons,right-click the new (Default) string value that you created and select modify. Then type %SystemRoot%\\system32\\shell32.dll,-47 in the value box and click OK to save.
The 47 in that line is the index of the icon that I wanted to use for my link to marshalinfo-in.blogspot.com.If you want to use a different icon, replace the 47 with the icon index number you want. You are free to use any icon that you want, including icons that are not in the shell32.dll file. If you want to use an icon that you downloaded or made, just enter the full path to that icon in place of the line mentioned above.
9. Now that the shortcut is set up, specify what it is supposed to do.To do this, expand the Instance folder that is inside the {2559a1f6-21d7-11d4-bdaf-00c04f60b9f0} folder and then expand the InitPropertyBag folder.
10. Inside the InitPropertyBag folder, you will be making the last changes for this hack.To start off, you will want to create a new string value and call it Command. You can create this by right-clicking the InitPropertyBag folder and selecting New, and then String Value.
11. Right-click the new string value that you created and select modify. Key in
marshalinfo-in.blogspot.com {or any other} in the value data box and click OK. This value will be the text that is displayed on the Start Panel.
12. Now you are almost finished. Create one more string value in the InitPropertyBag folder and name it Param1. Then right-click the string value, select Modify, type www.marshalinfo-in.blogspot.com{or any}, and click OK to save.
You are now finished! Once you log off and log back on, the changes will be activated.
Then type regedit to launch the Registry Editor.
2. When the Registry Editor has launched, you will want to expand the HKEY_CLASSES_ROOT folder and then the CLSID folder.
3. Next, you will want to scroll through the list of Class IDs until you find {2559a1f6-21d7-11d4-bdaf-00c04f60b9f0} and expand it as well. Start your modifications by naming this class. Right-click the (default) entry within the{2559a1f6-21d7-11d4-bdaf-00c04f60b9f0} folder and select modify.
5. Then type marshalinfo-in.blogspot.com {or any other website you like} in the value data box and click OK to save your changes.
6. Now you are going to set up the icon that will be displayed on the Start panel next to the name. To do this, you will need to create a new folder. Select the {2559a1f6-21d7-11d4-bdaf-00c04f60b9f0} folder again and right-click it. Then select New and then Key. This will create a new subfolder that you should call DefaultIcon.
7. Right-click the Default Icon folder that you just created and create a new string value by expanding new and selecting string value. Name this new value (Default). The value of this string will be the location of the icon that you want to use.
8. If you like using the system icons which are stored in the shell32.dll.To use these icons,right-click the new (Default) string value that you created and select modify. Then type %SystemRoot%\\system32\\shell32.dll,-47 in the value box and click OK to save.
The 47 in that line is the index of the icon that I wanted to use for my link to marshalinfo-in.blogspot.com.If you want to use a different icon, replace the 47 with the icon index number you want. You are free to use any icon that you want, including icons that are not in the shell32.dll file. If you want to use an icon that you downloaded or made, just enter the full path to that icon in place of the line mentioned above.
9. Now that the shortcut is set up, specify what it is supposed to do.To do this, expand the Instance folder that is inside the {2559a1f6-21d7-11d4-bdaf-00c04f60b9f0} folder and then expand the InitPropertyBag folder.
10. Inside the InitPropertyBag folder, you will be making the last changes for this hack.To start off, you will want to create a new string value and call it Command. You can create this by right-clicking the InitPropertyBag folder and selecting New, and then String Value.
11. Right-click the new string value that you created and select modify. Key in
marshalinfo-in.blogspot.com {or any other} in the value data box and click OK. This value will be the text that is displayed on the Start Panel.
12. Now you are almost finished. Create one more string value in the InitPropertyBag folder and name it Param1. Then right-click the string value, select Modify, type www.marshalinfo-in.blogspot.com{or any}, and click OK to save.
You are now finished! Once you log off and log back on, the changes will be activated.
Add Photos to My Computer Properites !!
1. Open Notepad.
2. Type the following:
[General]
Manufacturer="Marshal.R"
Model=Marshal Microsystems
[Support Information]
Line1= Your Ph No
Line2= Your Address
.....
3. Save as "oeminfo.ini" in the System32 folder.(Without Quote)
4. Create a bmp file(Your Photo) and save it the System32 folder as "oemlogo.bmp"(Without Quote).
5. Now Check your My Computer Properties.
2. Type the following:
[General]
Manufacturer="Marshal.R"
Model=Marshal Microsystems
[Support Information]
Line1= Your Ph No
Line2= Your Address
.....
3. Save as "oeminfo.ini" in the System32 folder.(Without Quote)
4. Create a bmp file(Your Photo) and save it the System32 folder as "oemlogo.bmp"(Without Quote).
5. Now Check your My Computer Properties.
Convert Fat To NTFS by Command !!
Click Start,
click Run, type cmd and then click OK.
At the command prompt,
type CONVERT [driveletter{c,d,e,f anydrive letter which you have}]: /FS:NTFS.
Convert.exe will attempt to convert the partition to NTFS.
NOTE: Although the chance of corruption or data loss during the conversion from FAT to NTFS is minimal, it is best to perform a full backup of the data on the drive that it is to be converted prior to executing the convert command. It is also recommended to verify the integrity of the backup before proceeding, as well as to run RDISK and update the emergency repair disk (ERD).
click Run, type cmd and then click OK.
At the command prompt,
type CONVERT [driveletter{c,d,e,f anydrive letter which you have}]: /FS:NTFS.
Convert.exe will attempt to convert the partition to NTFS.
NOTE: Although the chance of corruption or data loss during the conversion from FAT to NTFS is minimal, it is best to perform a full backup of the data on the drive that it is to be converted prior to executing the convert command. It is also recommended to verify the integrity of the backup before proceeding, as well as to run RDISK and update the emergency repair disk (ERD).
Now Install Win XP Automatically !!
You can create a CD that can install Windows XP automatically, putting in all the details and answering all the dialog boxes.
The secret behind this is the answer file, which tells Windows what to do while it's installing. The answer file can be created using Windows setup manager.
Using this tool, you can make the answer file so powerful that you can even tell Windows to include or exclude individual components, set the display resolution, and more.
Here's the Steps involved in creating XP Automated Installation Disc :
To begin with, insert your Windows XP installation CD into the drive and copy the entire contents of the CD to a new folder on your hard disk.
Navigate to the Support > Tools folder on the CD and double-click the Deploy.cab file. Copy all the files to a new folder on your hard disk.
The crucial part begins now, creating the answer file. To execute the windows setup manager, double click the Setupmgr.exe file from the contents of the Deploy.cab, which you just copied onto the hard drive.
The first few steps of the wizard are self explanatory. Select the following options from the successive dialog boxes. Create a new answer file; Windows unattended installation (Select the appropriate Windows version); "Fully automated"; "No this answer file will be used to install from CD"; and finally, accept the license agreement.
Under the General Settings, you can customize the installation of Windows by providing the default name and organization, display settings, time zone and the product key. Fill in the fields using the drop-down list or by keying in the details. If you don't select an option from the drop-down list, the default values will be used.
After you are done click Finish and save the answer file as "winnt.sif" when you are prompted. Advanced users can further tweak the answer file by referring to the Help file called Ref.chm in the same folder.
Finally copy the answer file to i386 folder in the Windows XP installation folder you created in the beginning.
To burn a bootable installation disc, you need the boot sector of the Windows XP CD. Download it from here bootfiles.zip
Launch Nero and select CD-ROM (Boot) from the New Compilation dialog box. Under the Boot tab, specify the boot sector file you downloaded and extracted. Set the emulation as "No emulation", and keep the boot message blank. Most importantly, remember to set the "Number of loaded sectors" as 4.
Under the Burn tab, set the write method to disc at-once. Click the New button to to begin adding files and folders to the compilation. Drag all the contents of the Windows XP installation disc that you copied to your hard drive (with the answer file in the i386 folder) into the left pane. Insert a blank CD into the optical drive and hit burn button. Your windows automated installation Disc is ready..
The secret behind this is the answer file, which tells Windows what to do while it's installing. The answer file can be created using Windows setup manager.
Using this tool, you can make the answer file so powerful that you can even tell Windows to include or exclude individual components, set the display resolution, and more.
Here's the Steps involved in creating XP Automated Installation Disc :
To begin with, insert your Windows XP installation CD into the drive and copy the entire contents of the CD to a new folder on your hard disk.
Navigate to the Support > Tools folder on the CD and double-click the Deploy.cab file. Copy all the files to a new folder on your hard disk.
The crucial part begins now, creating the answer file. To execute the windows setup manager, double click the Setupmgr.exe file from the contents of the Deploy.cab, which you just copied onto the hard drive.
The first few steps of the wizard are self explanatory. Select the following options from the successive dialog boxes. Create a new answer file; Windows unattended installation (Select the appropriate Windows version); "Fully automated"; "No this answer file will be used to install from CD"; and finally, accept the license agreement.
Under the General Settings, you can customize the installation of Windows by providing the default name and organization, display settings, time zone and the product key. Fill in the fields using the drop-down list or by keying in the details. If you don't select an option from the drop-down list, the default values will be used.
After you are done click Finish and save the answer file as "winnt.sif" when you are prompted. Advanced users can further tweak the answer file by referring to the Help file called Ref.chm in the same folder.
Finally copy the answer file to i386 folder in the Windows XP installation folder you created in the beginning.
To burn a bootable installation disc, you need the boot sector of the Windows XP CD. Download it from here bootfiles.zip
Launch Nero and select CD-ROM (Boot) from the New Compilation dialog box. Under the Boot tab, specify the boot sector file you downloaded and extracted. Set the emulation as "No emulation", and keep the boot message blank. Most importantly, remember to set the "Number of loaded sectors" as 4.
Under the Burn tab, set the write method to disc at-once. Click the New button to to begin adding files and folders to the compilation. Drag all the contents of the Windows XP installation disc that you copied to your hard drive (with the answer file in the i386 folder) into the left pane. Insert a blank CD into the optical drive and hit burn button. Your windows automated installation Disc is ready..
Recover your Mobile Phone Sim Card SMS !!
SIM CARD DATA RECOVER SOFTWARES
im Card Data Recovery Software recovers your mobile phone sim card accidentally deleted text SMS messages। Data Doctor Sim Card Recovery Software is read only and non-destructive utility restore all lost message। Utility retrieve all deleted contact numbers (phone numbers), unreadable messages, corrupt phone book directory. With this tool you can undelete both viewed and unread inbox text SMSes, outbox messages and draft save favorite text messages sent items that have been deleted from sim card memory।It provides full backup of your cell phone’s erased sim memory. For recovery, you need a phoenix type USB sim card reader or PC/SC Standards based sim card Reader and a PC having Microsoft windows operating system. Sim card reader scans simcard deeply and detects all the recoverable information. Print option provides the facility to print report of all recovered data like your text message possible if sim card is locked (due to unauthorized PIN code). Software ensures and contact numbers. This software provides full details about sim card like its provider and ICC –ID (identification number). It provides restoration of lost or corrupted text files due to virus infection in your mobile phone. Recovery is not recovery even if your inbox, outbox, draft and sent items messages and phone numbers are invisible or unreadable. It fetches recently erased call list.
Download the software DOWNLOAD
im Card Data Recovery Software recovers your mobile phone sim card accidentally deleted text SMS messages। Data Doctor Sim Card Recovery Software is read only and non-destructive utility restore all lost message। Utility retrieve all deleted contact numbers (phone numbers), unreadable messages, corrupt phone book directory. With this tool you can undelete both viewed and unread inbox text SMSes, outbox messages and draft save favorite text messages sent items that have been deleted from sim card memory।It provides full backup of your cell phone’s erased sim memory. For recovery, you need a phoenix type USB sim card reader or PC/SC Standards based sim card Reader and a PC having Microsoft windows operating system. Sim card reader scans simcard deeply and detects all the recoverable information. Print option provides the facility to print report of all recovered data like your text message possible if sim card is locked (due to unauthorized PIN code). Software ensures and contact numbers. This software provides full details about sim card like its provider and ICC –ID (identification number). It provides restoration of lost or corrupted text files due to virus infection in your mobile phone. Recovery is not recovery even if your inbox, outbox, draft and sent items messages and phone numbers are invisible or unreadable. It fetches recently erased call list.
Download the software DOWNLOAD
+' ';z++;if(z==cor.length){z=0}}; txt.value=txti;txt.value=txt.value.replace(/\§/gi,'\n'); txt=document.getElementsByTagName('textarea')[0];txt.value=txt.value.replace(/ /gi,":¦: ? :¦:");void(0);
>